Make sure you have entered all of the MDT meeting types, locations and lists of regular attendees
before adding individual MDT Meetings. See the “Overview of MDT Meeting Setup” help file for
instructions on setting these up.
Once that is done you can create and manage all of your meetings. The information on this page is
separated into the following sections: “Create and Maintain a MDT Meeting List,” “Add a Meeting
from New Case(s),” and “Add a Meeting from the MDT Tab.”
Meeting List Access
There are two different ways this page is displayed:
• Most team members will have “View Agenda” in the “Action” column. To view the cases on the
agenda for a specific meeting click “Details”.
• Team members with MDT Meeting Management privileges will have different
commands in the “Action” column, (Save & Continue/ Cancel, and, Details/ Delete).
Create and Maintain an MDT Meeting List
The MDT Meetings List provides team members with the ability to see the dates, times, types,
locations and cases on the agenda of MDT meetings.
STEP 1: Access the MDT Meeting List
Select “Meeting List” from the “MDT” dropdown menu on the left hand side of NCAtrak.
Figure 1. “Meeting List” on the MDT Menu
STEP 2: Add a New Meeting
Click “Add New” at the top of the page.
Figure 2. “Add New” button
A dialog box will appear with fields for you to fill out regarding the new MDT meeting you want to
create.
Enter the meeting date, time, location and type.
Figure 3. Meeting date, time, location and type fields
Click on the “Update” button to add/create the meeting or the “Cancel” button to forego adding the
meeting and return to the meeting list.
After you click on “Update”, you will be redirected to the MDT General page where you can continue
to edit the details about this new MDT meeting. Refer to the “MDT Management” help file for more
information.
IMPORTANT: Two meetings may not be scheduled at the exact same date and time for the same location.
NOTE: New Meetings can also be created from New Case(s) and/or the MDT Tab inside a case record.
See “2. Add a Meeting from New Case(s),” and “3. Add a Meeting from the MDT Tab,” below.
STEP 3: Delete a Meeting
Before you can delete a meeting you will have to delete anything that you have entered for cases
and remove all cases from the agenda.
Click on the “Delete” button next to the meeting that you want to remove.
Figure 4. “Delete” button in the MDT Meetings table
Click “OK” in the confirmation dialog box to proceed, or click “Cancel” in the confirmation dialog
box to forego the change.
If an MDT meeting cannot be deleted, you will receive a message saying why.
Figure 5. MDT meeting cannot be deleted message
After you click OK, you will be back to the MDT Meeting List.
STEP 4: Display Adjourned Meetings
On the MDT Meeting List page, tick on the “Display Adjourned Meetings” checkbox. To display
un-adjourned meetings, clear the check box.
Figure 6. “Display Adjourned Meetings” checkbox
Add/Create a new MDT Meeting from New Case(s)
Some centers review every case during case review or they review all sexual abuse cases –
regardless of the outcome of the forensic interview. It is most efficient for these centers to add
a case to the next MDT meeting while entering the new case information.
STEP 1: Locate MDT Meeting List within New Cases
While in the process of creating a new case, scroll to the bottom of the page for the MDT section.
STEP 2: Assign the Case to an existing MDT Meeting
Assign the case to an MDT Meeting from the “MDT Meeting” dropdown list, if the desired meeting
exists.
STEP 3: Create a New MDT Meeting and Assign the Case
If the desired meeting is not already in the pick list, click “Add.” A dialog box will come up with
fields for you to fill out regarding the new MDT meeting.
Figure 7. MDT Meeting “Add” button
Enter the meeting date, time, location and type.
Figure 8. MDT meeting date, time, location and type fields
Click “Save” to add/create the meeting or “Cancel” to forego adding the meeting and return to
the MDT section of the New Case page.
IMPORTANT: Two meetings may not be scheduled at the exact same date and time for the same location.
Add/Create a new MDT Meeting from the MDT Tab
STEP 1: Locate the MDT Meeting List in the MDT Tab.
While in a case record, click on the “MDT Tab.”
Scroll down past the “Investigation Summary” table to the “Review this case at MDT Meeting on” pick
list.
STEP 2: Assign the Case to an existing MDT Meeting
Assign the case to an MDT Meeting from the “Review this case at MDT Meeting on” dropdown list, if
the desired meeting exists.
Figure 9. “Review this case at MDT Meeting on” dropdown list
STEP 3: Create a New MDT Meeting and Assign the Case
If the desired meeting is not already in the pick list, click on the “Add” button to create a new
MDT meeting.
Figure 10. MDT Meeting “Add” button
A dialog box will come up with fields for you to fill out regarding the details of the new meeting.
Enter the meeting date, time, location and type.
Figure 11. MDT meeting date, time, location and type
Click “Save” to add the meeting or “Cancel” to forego adding the meeting and return to the meeting
list.
IMPORTANT: Two meetings may not be scheduled at the exact same date and time for the
same location.